How do I reset the WiFi on my Traeger grill?

Have you reset the WiFi network settings on the grill controller? On controller: Go to MENU > WIFI INFORMATION; Hold IGNITE for 10-15s. This resets the WiFi settings and allows you to start over with a fresh initial pairing process on most grills.

How do I clear my Traeger WiFi?

Reset the grill’s WiFi.

  1. On your controller navigate to MENU > WIFI INFORMATION.
  2. While on the WIFI INFORMATION screen, press and hold the IGNITE button for 10 seconds.
  3. Power Cycle the grill.
  4. Turn off and unplug the grill.
  5. Flip the power switch to the on position and wait 10 seconds.

How do you get your Traeger back online?


  1. On the grill’s controller, navigate to MENU > WIFI INFORMATION.
  2. If the grill is connected to the correct WiFi on the controller, but is not connected within the app, go to Grill Appears Offline in App.
  3. If the grill is connected to the incorrect WiFI network, forget the network and try to pair again.

How do I reset my Traeger?

For a soft reset, power off your smartphone or tablet with the Traeger app. Wait a few minutes, then turn the phone back on. Then, power off the grill by switching the power switch off. Wait 30 seconds and then turn the grill back on using the same switch.

Why will my Traeger not connect to WiFi?

To fix your Traeger WiFi issues make sure you are using the latest version of the Traeger App and that your grill is running the latest Firmware. Then power cycle both your phone and the grill, factory reset the grill and then pair your grill to WiFi (2.4GHz only). Pairing takes 4 hours.

IMPORTANT:  How long does a gas kettle take to boil?

Where is the WiFi password on a Traeger?

Enter the grill’s Name. On your grill’s controller, navigate to Menu > WiFi Information > Grill Name. The password is the 4 characters listed after “Name: Traeger-” (e.g., 7A8E).

How do I connect to 2.4 GHz WiFi?

To connect your Android device to a 2.4 GHz network:

  1. Unlock your device and tap the Settings app.
  2. Tap Network & Internet > Wi-Fi.
  3. Enable Wi-Fi by tapping Use Wi-Fi at the top.
  4. Select a 2.4 GHz Wi-Fi network.
  5. If prompted, enter the password for the network.

Can a Traeger be connected to more than one phone?

Multiple devices with the Traeger App installed can monitor and control the same WiFIRE-enabled grill; but, they all devices must be signed into the same account. Only one device can control the grill at a time. Plug in and turn on your grill. Open the Traeger App on your additional device.

How do I reset my Traeger Pro 780?

Factory Reset Grill – On grill go to menu, settings, about grill, then press and hold the ignite button until you see the Traeger logo (about 5-10 seconds). Check Firmware version – On grill go to menu, settings, about grill and confirm the grill has reset to 01.01. 06 (If still on 2.00. 00 then repeat step two).

What do I do when my Traeger is offline?

If the grill still shows as Offline within the app, re-pair your grill with your app. Remove the Grill from the App. Reset your grill’s WiFi.
Continue to the next step of troubleshooting if the grill continues to show as offline within the app.

  1. Check your app version.
  2. Clear the App Cache.
  3. Sign in and out of the app.

Why is my Traeger app not working?


Let’s make sure your app is up to date and that your settings are set up correctly. Check your app version. Open the Traeger app. Tap Account Name at the top of the screen.

How do I update my Traeger software?

Your grill should update on its own whenever Traeger releases a new update. It will usually do this during startup or shutdown, but you may need to leave the grill on for a few hours or overnight. Just make sure the grill is connected to WiFi.

What is 2.4 GHz router?

The 2.4 GHz frequency of the wifi router offers the wifi user a wide coverage area and is better at penetrating solid objects with a usable speed of 50 -70 Mbps (subject to real world scenarios). On the other hand, it has a lower data range and is highly prone to interference and disturbance.

How do you tell if my WiFi is 2.4 or 5?

Steps are as follows.

  1. Use your Android phone to connect to the Wi-Fi network.
  2. Go to Settings > Wi-Fi > Select the connected network to see the Wi-Fi details. Note: Different Android phones might have different settings.
  3. Read the frequency band setting. See pictures below about 2.4GHz Wi-Fi and 5GHz Wi-Fi.

How do I change my email on my Traeger app?

Sign in and go to the Settings tab of your user dashboard. To the right of your email address, click Edit. For a new primary email, type in the new email address where indicated.

IMPORTANT:  How long does it take to put a pit boss grill together?

Why is my 2.4 Wi-Fi not working?

If your device can’t connect to your 2.4 GHz Wi-Fi band, check your device settings and make sure it’s set to connect to the 2.4 GHz band. You can also update your router and your device and restart or reset the router.

How do I change my Wi-Fi frequency?

Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.

Where is the QR code on my Traeger?


Sign In using your existing Traeger account credentials, or select Sign Up to create a new account. Locate the QR code under the lid of your pellet hopper. If you have replaced your controller, the QR Code under your hopper lid will not be associated with the new controller.

Does Traeger have an app?

The new Traeger Grills App is available now from the App Store for iOS and the Google Play Store for Android.

Can Traeger connect to Alexa?


Alexa allows you to monitor and control your WiFIRE-enabled grill, similarly to how you do so on the Traeger App.

How does the Traeger app work?

These grills us an app called Traeger WiFIRE, which allows you to control your grill’s temperature and cook time.
Connect Your Phone to the Grill

  1. Open it.
  2. Select “Add New Grill.”
  3. Choose your grill’s model, then tap “Next.”
  4. Accept Traeger’s terms and conditions.
  5. Select your Wi-Fi network and click “Continue.”

How long does it take Traeger to do software update?

It may take up to 24 hours to receive the configuration update.

Can I upgrade my Traeger to WiFi?

Take command of your grill from the couch, or on-the-go with the new WiFi controller that connects your smartphone to the grill via the Traeger App. Bring the true power to your fingertips. Just download the Traeger App on your smartphone and connect to the wifi-enabled controller for total control.

What does the code LEr mean on Traeger?

LEr stands for Low Error Reading. It is an error message specific to non-WiFIRE grills, except for the 2017 Timberline 850 and the 2017 Timberline 1300. Getting this message means that your grill dropped below 125°F for more than 10 minutes, causing your grill to shut off.

Can you connect to 2.4GHz and 5ghz at the same time?

Simultaneous dual-band routers are capable of receiving and transmitting on both 2.4 GHz and 5 GHz frequencies at the same time. This provides two independent and dedicated networks which allows more flexibility and bandwidth.

Which is better 2.4GHz or 5ghz WiFi?

A 2.4 GHz connection travels farther at lower speeds, while 5 GHz frequencies provide faster speeds at shorter range. Your choice of 2.4 GHz or 5 GHz will depend on where and how you use your WiFi connection most.

How do I test my WiFi signal?

In Windows, go to Network and Internet, and then Network and Sharing Center. Select the blue WiFi link to see the signal strength. On an Android phone or tablet. Look under Settings, WiFi, or Network, and search for a gear or WiFi icon next to the network you’re connected to.

IMPORTANT:  How do you make fried fish skin crispy?

How do you tell if you are connected to 5GHz or 2.4GHz Iphone?

Check the name of the Wi-Fi network you’re connected to.

Tap and hold the Wi-Fi icon in the top-left corner. The name of your Wi-Fi access point appears below “Wi-Fi” on the left side of the panel. If you see either “2.4GHz” or “5GHz” here, you’ll know that you’re connected on that frequency.

Does Traeger have an Android app?

We’ve upgraded our app with a fresh look and feel that offers an enhanced experience whether you’re cooking, discovering tips & tricks, or getting inspired with hundreds of wood-fired recipes.

What is the WiFIRE app?

WiFIRE® Control: Adjust grill temperature, monitor internal food temps, set alerts and timers, & more directly through the App. Learn From the Pros: Detailed videos featuring recipes and tips & tricks put you in the kitchen with your favorite pitmasters and chefs.

What is the primary email address?

By default, the primary email is the email address you provided when creating your Loop account. This email is used every time you want to access or update your Loop profile once the registration procedure is complete. In the majority of cases, updates and invitations will be sent to your primary email address.

How do I reset my 2.4GHz Wi-Fi?

How to setup 2.4 GHz wifi?

  1. Enter the IP address in a browser.
  2. Login with your username and password – Typically, it will be Username: admin Password: blank or admin.
  3. Click Advanced Settings tab.
  4. Click Network Settings.
  5. Enable the 2.4 Ghz band.

What causes Wi-Fi to go out?

If you’re too far from your router, your internet may cut in and out as Wi-Fi signals struggle to reach your device. Obstructions between your device and your router may also cause intermittent disconnections. Pay attention to your device’s Wi-Fi signal meter to see where your Wi-Fi signal gets weak and disconnects.

How do you reset the router?

How to Reset a Router

  1. Keep your router plugged in.
  2. Find your router’s reset button. This will be on the back or the bottom of your router.
  3. Use a paperclip to hold down the reset button for 30 seconds.
  4. Release the button.
  5. Wait for the router to power back on.

What does changing Wi-Fi channel do?

If your electronic devices or your neighbor’s network slow down your home network and internet connection, change the wireless channel on your router to communicate on a different frequency to avoid interference. This information applies to all routers that use 2.4 GHz or 5 GHz Wi-Fi.

How do you I access my router settings?

Tap on the network name. Look for a ‘gateway’, ‘router’ or other entry in the list.
Find router IP address on Android or iOS

  1. Tap on Wi-Fi.
  2. Make sure your phone is connected to your router’s Wi-Fi network.
  3. Tap the ‘i’ to the right of the network name.
  4. Your router’s IP address is shown next to ‘Router’

Can you control Traeger remotely?

Traeger’s app does allow for remotely monitoring grill temperature, probe temperature, and other settings, as well as adjusting them.